Print Back

Full Thread Stainless Steel Weld Studs are used in all types of applications. They can be welded to a flat surface, or to the inside or outside of an angle.

The Drawn Arc Stud welding is a process by which a metal fastener is welded to a base metal through a fusion weld. Using a ceramic ferrule to capture and retain the weld’s heat, the molten metal created by the process cools the weld site and produces a weld that is stronger than the stud itself. Drawn arc stud welding can be used with dissimilar metals such as mild and stainless steel, as well as aluminum and some specialty alloys.  These studs can sometimes be referenced as TT Studs, CFL Studs, PD Studs or FT Studs.  Weld Studs or Welding Studs.

Full Thread Drawn Arc Weld Studs
Unit of Measure
Items Full Thread Drawn Arc Weld Studs
FTS2500625
Full Thread Stainless Steel Weld Stud, Thread Size 1/4-20, Length Before Weld 5/8"
Full Thread Drawn Arc Weld Studs
FTS2500750
Full Thread Stainless Steel Weld Stud, Thread Size 1/4-20, Length Before Weld 3/4"
Full Thread Drawn Arc Weld Studs
FTS2500875
Full Thread Stainless Steel Weld Stud, Thread Size 1/4-20, Length Before Weld 7/8"
Full Thread Drawn Arc Weld Studs
FTS2501000
Full Thread Stainless Steel Weld Stud, Thread Size 1/4-20, Length Before Weld 1"
Full Thread Drawn Arc Weld Studs
FTS2501125
Full Thread Stainless Steel Weld Stud, Thread Size 1/4-20, Length Before Weld 1-1/8"
Thread Size N/A 1/4-20
Length Before Weld N/A 5/8 in N/A 3/4 in N/A 7/8 in N/A 1 in N/A 1-1/8 in
Stud Style N/A Full Thread
Material N/A Stainless Steel
Process N/A Drawn Arc
Industries N/A Automotive Construction Industrial
Note N/A

All stud lengths are before weld. Typical burn off of 1/8” on studs up to 1/2 Dia. and 3/16” burn off on studs 5/8 Dia. and above. Other sizes are available upon request.