Print Back

Partial Thread Mild Steel Weld Studs are used in all types of applications. They can be welded to a flat surface, or to the inside or outside of an angle.The Drawn Arc Stud welding is a process by which a metal fastener is welded to a base metal through a fusion weld. Using a ceramic ferrule to capture and retain the weld’s heat, the molten metal created by the process cools the weld site and produces a weld that is stronger than the stud itself. Drawn arc stud welding can be used with dissimilar metals such as mild and stainless steel, as well as aluminum and some specialty alloys. These studs can sometimes be referenced as TP Studs, CPL Studs, PDB Studs or PT Studs. Weld Studs or Welding Studs.

Unit of Measure

Specifications

Thread Size

N/A 5/8-11

Length Before Weld

N/A 1-1/4 in

Stud Style

N/A Partial Thread

Material

N/A Mild Steel

Process

N/A Drawn Arc

Industries

Industries

N/A Automotive Construction Industrial

Note

N/A

All stud lengths are before weld. Typical burn off of 1/8” on studs up to 1/2 Dia. and 3/16” burn off on studs 5/8 Dia. and above. Other sizes are available upon request.